Fab Times | Introducing the 4 Most Common Arc Welding Methods

Starting this journey, I mentioned there are several dozen welding methods to choose from. Helping to keep us on a steady course, I followed the Visual Welding History, illustrated by WeldGuru.com:

So far, we’ve explored nearly the whole welding family tree, leaving us with arc welding. In this category alone, there are dozens of arc welding varieties with enough information to fill libraries.
Of that myriad of arc welding methods, four are the most commonly used:

  • Flux Cored Arc Welding (FCAW)
  • Gas Metal Arc Welding (GMAW/MIG)
  • Gas Tungsten Arc Welding (GTAW/TIG)
  • Shielded Metal Arc Welding (SMAW)

These are the next four articles in our series on welding. We’ll finish things up with a look at how welding is developing.

Arc Welding Basics

Regardless of the method, arc welding uses the same method. Illustrated in the figure below is a power source connected to the working piece and referred to as a hot cable to an electrode holder. The holder contacts with the welding electrode, creating an arc across the gap.

The arc itself is a current flowing between two electrodes through ionized gas. Negatively charged cathodes and positively charged anodes create temperatures approaching 6,600 ºF at the tip, hot enough for melting the base metal and electrode, creating a pool of melted metal. The pool solidifies, resulting in a fusion bond.

An arc during the welding process has more than one job:

In welding, the arc not only provides the heat needed to melt the electrode and the base metal but, under certain conditions, must also supply the means to transport the molten metal from the tip of the electrode to work. Several mechanisms for metal transfer exist. Two (of many) examples include:

Surface Tension Transfer -a drop of molten metal touches the molten metal pool and is drawn into it by surface tension.

Spray Arc -the drop is ejected from the molten metal at the electrode tip by an electric pinch propelling it to the molten pool.

Since there must be an ionized path to conduct electricity across a gap, the mere switching of one of the welding currents with an electrically cold electrode posed over it will not start the arc. The arc must be ignited. This is caused by either supplying an initial voltage high enough to cause a discharge or touching the electrode to work and then withdrawing it as the contact area becomes heated.

In Sum

The information above provides a general summary of arc welding. The next four articles explore the four most common methods in-depth.

Originally published at https://www.schuettemetals.com.




Able to share what I've learned, regardless of complexity, in a clear, concise way. We never stop learning!

Love podcasts or audiobooks? Learn on the go with our new app.

Recommended from Medium

My Journey to become a UX designer

NFT for Social Good — GoodBunny Society

The window into a bright future

Veneer of Superficiality

Why content design is important, but shouldn’t be noticed

A pen lays on an open journal. Beside it are a computer and mug.

‘Ecological, Desirable, and Inclusive’: Reinventing the Champs-Élysées

A rendered images of the Arc de Triomphe and the start of the Champs-Elysees, featuring a renovated road with grey-white pavement and criss-cross patterns

Gameplay Journal #8

Guide To Creating Your Web Agency

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
David Manney

David Manney

Able to share what I've learned, regardless of complexity, in a clear, concise way. We never stop learning!

More from Medium

How to setup Sitecore 10.2 on Docker Containers in under 30 minutes using 5 easy steps

Essence of Architecture: Part 2 — Architecture as Extension of the Body

The Home Doctor — Practical Medicine for Every Household: